Related Manuals for Semtech IOT8EUSBREF-1
Summary of Contents for Semtech IOT8EUSBREF-1
- Page 1 Smart Building Reference Kit User Guide (“User Guide”) IOT8EUSBREF-1 (EU 868) IOT9USSBREF-1 (NA 915) August 2019...
- Page 2 The data in each dashboard is stored for a maximum of 30 days. To provide the best user experience, we recommend visiting our LoRa® Developer Portal and downloading the latest version of this User Guide. https://lora-developers.semtech.com/resources/developer-kits/smart-building-kit/smart-building-kit-welcome/ Smart Building Reference Kit User Guide | Proprietary Information | Semtech Corporation...
-
Page 3: What Is In The Kit
Failure to provide a LoRaWAN network before enabling the sensor can result in excessive battery drain. GlocalMe is a registered trademark of UCLOUDLINK in Hong Kong. The GlocalMe logo and UCLOUDLINK are trademarks of UCLOUDLINK. Smart Building Reference Kit User Guide | Proprietary Information | Semtech Corporation... -
Page 4: Setting-Up The Kit
1. Fully charge the hotspot. 2. Once charged, press and hold the hotspot’s power button (#11) for five seconds and wait for the device to boot Figure 2: Hotspot Buttons and Ports Smart Building Reference Kit User Guide | Proprietary Information | Semtech Corporation... - Page 5 4. Once the hotspot displays the Wi-Fi name and password, as illustrated in Figure 4 you can start setting-up the mini-hubs. Figure 4: GLocal Logon Complete GlocalMe is a registered trademark of UCLOUDLINK in Hong Kong. The GlocalMe logo and UCLOUDLINK are trademarks of UCLOUDLINK. Smart Building Reference Kit User Guide | Proprietary Information | Semtech Corporation...
- Page 6 5 minutes thereafter. 2. Window/door sensors can be mounted on either side of the window frame or door frame, as illustrated in Figure 7. Smart Building Reference Kit User Guide | Proprietary Information | Semtech Corporation...
- Page 7 LED to the magnet face with the notch, as illustrated in Figure 8. The door/window sensor will provide an indication of whether the door or window is open or closed. Figure 8: Door/Window Sensor and Magnet Alignment Smart Building Reference Kit User Guide | Proprietary Information | Semtech Corporation...
- Page 8 6. The IR blaster can control wall-mounted HVAC systems, heaters, televisions and any other electronic devices that use an infrared signal with a known Pronto code. A list of codes can be found at either of these two websites: http://irdb.tk/ Smart Building Reference Kit User Guide | Proprietary Information | Semtech Corporation...
- Page 9 Note: Regulations require that the battery must be removed from the device when shipping or flying by air. Alternatively, you can re-insert the plastic tabs to disrupt the battery current. Smart Building Reference Kit User Guide | Proprietary Information | Semtech Corporation...
- Page 10 3. Once the computer is connected to the mini-hub, open a web browser and type 192.168.4.1 in the address bar. 4. Edit the Wi-Fi SSID and Wi-Fi Password to reflect the new Wi-Fi network you want to connect to. Click Apply to save your changes. Smart Building Reference Kit User Guide | Proprietary Information | Semtech Corporation...
-
Page 11: Led Indicators
For any additional questions about operation or help with troubleshooting please contact SBKSupport@semtech.com For more information about LoRa®, LoRaWAN® or the hardware contained within the kit please contact SBKSales@Semtech.com Smart Building Reference Kit User Guide | Proprietary Information | Semtech Corporation... - Page 12 The Kits are supplied for demonstration purposes only. Your use of the Kits for any purposes (e.g., commercial) is unauthorized by Semtech and at your own risk. THE KITS ARE PROVIDED "AS IS" AND WITHOUT WARRANTY OF ANY KIND EXPRESSED OR IMPLIED. SEMTECH EXPRESSLY DISCLAIMS ALL WARRANTIES, EXPRESSED, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, AND NON- INFRINGEMENT OF INTELLECTUAL PROPERTY RIGHTS.
- Page 13 Cleaning: Use a clean, dry cloth or wipe to clean products. Do not use detergent or abrasive materials to clean the Tabs products, as this may damage the sensors. Smart Building Reference Kit User Guide | Proprietary Information | Semtech Corporation...