Advertisement
Setting-up the sensors
In this kit, we are monitoring room or desk use, temperature, humidity and leaks. To this end, set up the
sensors as follows.
1. Grid Eye sensors are most effective if mounted on the ceiling or inside of a lighting fixture. Use the
adhesive tape provided with the sensor to mount it in an appropriate location in your conference
room. The Grid Eye sensor can be used to determine the number of people occupying a room. The
sensor begins the count when motion is detected and provides an update approximately every 5
minutes thereafter.
2. Window/Door sensors can be mounted on either side of the window frame or door frame, as
illustrated in Figure 7.
Figure 7: Window and Door Sensor Placement
Note: The maximum allowable gap between a sensor and the corresponding magnet is 1 cm. Be
sure to align the sensor side with the blue LED to the magnet face with the notch, as illustrated in
Figure 8.
The Door/Window sensor will provide an indication of whether the door or window is open or closed.
Figure 8: Sensor / Magnet Alignment
Smart Building User Guide | Proprietary Information | Semtech Corporation
Advertisement
