Alfa Network APS08 Specifications

APS08
4+4 10/100M PoE Switch
The device is a powerful, high-performance Fast Ethernet Switch, with all 8 ports capable of 10 or 100Mbps
auto-negotiation operation (NWay), which means the switch could automatically negotiate with the connected
partners on the network speed and duplex mode. It is ideal for micro-segmenting large networks into smaller,
connected subnets for improved performance, enabling the bandwidth demanding multimedia and imaging
applications. Moreover, the 10/100Mbps auto-sensing ability provides an easy way to migrate 10Mbps to
100Mbps network with no pain.
This Switch supports PoE, which supplies power for connected devices via CAT 5 and above twisted cables.
By integrating the data transmitting cable and power cord, it eliminates the effort constructing your network.
You could easily connect a wireless AP or a VoIP phone to this switch without looking outlets for them. Over
current protection and circuit shorting protection are also supported to ensure the safety
Features
Complies with 10BASE-T specifications of the IEEE802.3 standard
Complies with 100BASE-TX specifications of the IEEE802.3u standard
Compliant with IEEE 802.3af PoE standard (DTE power via MDI-X)
Provides 4 PoE ports with classification identify
Supports 15.4W maximum per PoE port
Supports over current protection and circuit shorting protection
8 x RJ-45 ports for 100BASE-TX and 10BASE-T connectivity
Support Nway protocol for speed (10/100Mbps) and duplex mode (Half/Full) auto-detection
Store-and-forward architecture filters fragment & CRC error packets
Support 1k MAC entries
768K Bits buffer memory