Gardenline GLM1650 Power Manual page 19

7739 1650 Lawn Mower User Guide
switch off the lawn mower and wait for the blade to
come to a complete stop. Then inspect the condition of
the blade and the blade mount. Replace any parts that
are damaged. Lay the power cable on the ground in
loops in front of the power outlet. Mow away from the
power outlet and cable, making sure that the power cable
always trails in the mowed grass so that the lawn mower
does not travel over the cable.
Mowing
As soon as you see mown grass on the lawn whilst you
are mowing, the grass bag will need emptying.
Important. Before you remove the grass bag switch off the
motor and wait until the cutting tool reaches a standstill.
To remove the grass bag, raise the discharge flap with one
hand and remove the grass bag using its handle with your
other hand. To maintain safety, the discharge flap will
close when you remove the grass back to seal the rear
discharge opening. If any grass residues are caught in the
opening, it is a good idea to pull the mower backwards
around 1 m to make it easier to start the motor.
Do not remove grass cuttings in the mower casing or on
the cutter by hand or with your feet. Instead use suitable
tools such as a brush or broom.
To ensure that it can collect the grass correctly the grass
bag and in particular the net must be cleaned from the
inside after use.
Only attach the grass bag after switching off the motor
and the cutting tool has reached a standstill.
Raise the discharge flap with one hand and, holding the
grass bag by its handle in your other hand, attach it from
the top.
Servicing and storage
Servicing and cleaning work on the lawn mower and the
removal of the guards may only be carried out after the
motor has been switched off and the plug disconnected
Helpline No. UK/Northern Ireland 0151 6491500
Rep. Ireland 1890 946244
Model Number: 7781
6/11/07 3:45 pm Page 20
19