Chapter 4 Operations
4.1. Power Connection
AC 100 - 240V
4.2. Installation of Phoenix-Pure32
Take out the instrument from the packaging carton and tear off the tape on the edge
of the operation window, then open it and take out the foam. Screw out the screw of
position ① as below, take out the baffle and release the drawer.
Note: Be careful while un-packing or the magnetic rod can be damaged.
4.3. Kits Installation
Take out the drawer and put in the 96 well reaction plate (already filled with your
samples) mounted on the locating slot, make sure the plate with notch is on the left
side, then push back the drawer slowly.
9