Table of Contents
Advertisement
•
The instrument should be kept in an area with minimal dust, away from wet
areas and direct sunlight. Additionally, the installation location should have
sufficient ventilation and be protected from electromagnetic interference and
heat sources.
•
The instrument must be placed on a level, vibration-free surface for proper
operation.
•
Do not cover the vent of the instrument as this can cause overheating.
•
When several instruments are used at the same time, the distance between
each instrument should be more than 100 cm.
•
Power off when not in use. If the instrument will not be used for a long period of
time, cover it with a cloth or plastic to protect it from dust.
•
Disconnect the power cord from the jack at once in the following cases, and
contact Procomcure Biotech:
o Liquid enters the instrument.
o Instrument became wet.
o Abnormal operation, such as abnormal sound or smell.
o Instrument was dropped or outer shell damaged.
o The function has obviously changed.
3. Maintenance
The instrument should be cleaned regularly using a soft cloth damp with a small
amount of alcohol. Stains on the surface of the instrument can be wiped with soft cloth
damp with cleansing cream.
4. Transportation and Storage Requirements
Ambient temperature: 10°C ~ 35°C
Relative humidity: ≤ 70%
Atmosphere pressure range: 500 ~ 1060 hpa
Locate it in a well-ventilated room, away from corrosive gas.
3
Advertisement
Table of Contents
