Table of Contents
Advertisement
4.5.2. Short Cut Mode
Under the shortcut mode, select the program needed and click "Run", it will enter into
the program run interface.
The program can also be selected by press "Tab" button on the panel and then press
"Run" for start or "Stop" for terminate.
On the left side, the current step info is shown. When this reagent position starts to run,
the position will be highlighted and there will be a temperature displayed on the
position of heating function. The progress bar will display the progress, the remaining
time is displayed in the top right corner.
•
Click "Pause" to pause or continue the program.
•
Click "Stop", the program will stop and there will be a check box. Click
"Cancel", the program will be continued, then click "OK" and the program run
will be back to original place and the "Stop" button will change to "Run Again".
Click "Run Again" to continue the program.
•
Click "Back" to return the previous menu.
Remark: If the drawer is open during operation, there will be a message box and the
device will stop to run. The instrument will continue to run only after the drawer is
closed.
11
Advertisement
Table of Contents
