Table of Contents
Advertisement
Click "Insert" to add a new step.
Click "Well" to fix the well number, then input the program name, waiting time,
mixing time, magnetic time and sample volume. At the end, please click the
mixing speed to select the speed.
Only well location 1,6, 7 & 12 have a heating function. When selecting other well
locations, "temperature" will not be displayed.
On suitable well locations, "temperature" is displayed and can be set within device
parameters. "Zero" means no heating is required.
Click "
" to enter the extended parameter setting interface. For all regular
applications, it is not necessary to change these settings. Click "
to the parameter setting interface.
Click "Delete" and then click "OK" to delete the last step; or click "Cancel" to
not delete the last step.
Click "Save" and then click "OK" to save the editing program; or click "Cancel"
to not save the edited program.
Click "Back", once the new program has been saved, to get back to the
"Management prog." interface.
Click "Cancel", to get back to "Management prog" interface without saving.
Click "Cancel", to stay in the "Insert" interface.
4.5.5.3 Edit
Choose the program in the "Manage prog." interface, then click "Edit" to enter the
program editing.
The following steps are identical to "Insert" (Chapter 3.5.2).
4.5.5.4 Save
In the "Manage prog." interface to make a selection, click "Save as" and then choose
a new program name, click "Enter" to save the current program, or "ESC" to not save.
4.5.5.5 Delete
In the "Manage prog." interface to make a selection, click "Delete" and then click
"Ok" to confirm or "Cancel" to not delete.
14
" to get back
Advertisement
Table of Contents
