Download Print this page
HEPRO Gripo Service Manual
Hide thumbs Also See for Gripo:

Advertisement

Quick Links

Gripo
Servicemanual
Gripo
35100
hepro.no
1

Advertisement

loading

Summary of Contents for HEPRO Gripo

  • Page 1 Gripo Servicemanual Gripo 35100 hepro.no...
  • Page 2 Warranty When used in accordance with the supplied assembly guide and the user reference manual, Hepro provides a two year warranty against defects in material and workmanship. Please address warranty complaints or other inquiries about the product to your supplier or importer. Always state the product`s serial number as a reference.
  • Page 3 Short product description Gripo Alu is classified in NS-EN ISO 9999 as a medical device and within the product group 180806, and is defined as a TELESCOPIC POLE to carry support devices. The pole is tested according to EN 12182 and approved for a horizontal load of 100 kg on the middle of the pole with maximum length 3,0 meter.
  • Page 4 Inner tube with tight lining  35270 Quick Release lock with lining  35207 Gas lift  35110 Top plate Technical specifications 35100 Gripo DIMENSIONS Height 2,1 – 3,0m Inner tube Ø31 x 6,0 x 1600mm Outer tube Ø40 x 3,0 x 1750mm...
  • Page 5 Safety provisions The installation of the pole should be carried out by a trained installer or, by someone that has thoroughly understood the assembly user guide. Warning  The product should not be assembled without prior training and before the user reference manual has been carefully read and understood.
  • Page 6 Installation Use Gripo user manual for installation instructions. Function verification and testing of product and accessories After the installation is completed, it must be checked that the red mark in the upper part of the inner tube just below the top plate is not visible. This should also be checked regularly while the pole is in use.
  • Page 7 Cleaning performed by user Normal dusting and cleaning with wet cloth and soap is sufficient. Periodic inspection GENERAL It is sufficient to inspect the pole upon recycling. For poles that are older than 5 years, the producer receommends inspection for potential recycling, once a year. PRODUCTS WITH SPECIAL LOADS The product has no particular need for periodic inspection, unless it is being used and exposed to special or extreme loads, over and above standard usage.
  • Page 8 Reservedelsliste 35110 Top plate 35207 Gas lift 35270 Quick release lock with lining 35115 Outer tube with lifting mechanism 35112 Base plate 35111 Inner tube with tight lining 35113 Complete foot pedal Parts, other than those stated, in the images above, must never be used or changed, as this can cause disqualification of the products’...
  • Page 9 HEPRO AS Øvermoan 9, 8250 Rognan +47 46 74 55 55 marked@hepro.no Mestring - Trygghet - Trivsel Se og kjøp våre produkter på hepro.no...

This manual is also suitable for:

35100