WatchNet PNT Hardware Manual page 9

2.2.1 1U
1. Remove the screws on the
rear panel.
2.2.2 2U
1. Remove the screws on
the cover.
4. Connect the other end of
HDD cable to the
mainboard.
2. Fix the screws on the
HDD, but do not be
fastened.
2. Fix the HDD(s) onto the
bracket. Remove the top
bracket if you want to
install HDD to the bottom
bracket.
5. Use the power cable to
connect HDD and
mainboard.
3. Place the HDD onto the
Device.
3. Connect one end of HDD
cable to the HDD.
6. Put back the cover and
fix the screws.