Installing Device Into Rack - WatchNet PNT Hardware Manual

2.3 Installing Device into Rack

Only 1.5U and 2U Devices support this installation.
To install the DVR into rack, do the following:
Step 1 Check whether the in-house temperature is lower than 35℃(95℉) and make sure the
15 cm (6 inches) spacing around the Device for ventilation.
Step 2 Use six screws to fix the DVR on each side.
Step 3 Install from the bottom up.
If you want to install more accessories to the rack, take preventive measures to avoid power
socket overload.
Step 4 (Optional) Install more accessories to the rack if needed.