CHARGING
Only charge the Power Station within the safe charging temperature range (32°–113°F (0°–45°C)).
You can power devices when charging. Do not connect an electrical device which requires over 800
Watts of power when charging due to the current capacity of the wall outlet.
DO NOT use electric devices with bare metal when charging to avoid the risk of electric shock.
AC CHARGING
Do not charge the Power Station immediately after it is fully discharged. For safety, wait 2
to 3 hours for the product to cool down before charging. If you attempt to charge iGen1000s
immediately after a full discharge, the iGen1000s will display
protection reminder.
Connect the unit to a 120V/60Hz power supply as shown.
VEHICLE CHARGING
Connect the unit to a 12V automotive charger as shown. Start the vehicle before charging.
12 | Westinghouse Outdoor Power Equipment, LLC
WARNING
WARNING
AC cable
as an overheating
Charge Input
0-80% charge in 2 hours
0-100% charge in 3 hours
XT60
Connector
500W Max
3.0 Hours
Car Charger
(96W Input)
<11 Hours
Charging 100% time
required