Dell UltraSharp 27 User Manual page 29

Driver installation
Install the Realtek USB GBE Ethernet Controller Driver available for your system. This
is available for download at
download" section.
Network (RJ45) data rate via USB-C max speed is 1000 Mbps.
NOTE: This LAN port is 1000Base-T IEEE 802.3az compliant, supporting
Mac Address (Printed on model label) Pass-thru, Wake-on-LAN (WOL)
from standby mode (S3 only) and PXE Boot function, these 3 features
depend on BIOS setting and OS version.
RJ45 Connector LED Status (U2722DE Only):
LED Color
Right LED Amber or Green Speed indicator:
Left LED Green
NOTE: RJ45 cable is non in-box standard accessory.
https://www.dell.com/support
Description
• Amber On - 100 0 Mbps
• Green On - 100 Mbps
• Off - 10 Mbps
Link / Activity indicator:
• Blinking - Activity on the port.
• Green On - Link is being established.
• Off - Link is not established.
under the "Driver and
Right LED
Left LED
About Your Monitor | 29