Download Print this page

Discovery Telecom 2914R-0214R Manual

Mission stair stepper bunk bed

Advertisement

Quick Links

2914R-0214R Mission Stair Stepper Bunk Bed
All of Discovery's Bunkbeds were designed and manufactured with your child's safety as our top priority.
Their unparalleled strength is a bi-product of the safety design. Our bunks meet all compliance with
ASTM F 1427-13 "Standard Consumer Safety Specification for Bunk Beds" and Code of Federal
Regulations (CFR) 1213 "Safety Standards for Entrapment Hazards in Bunk Beds" and (CFR) 1513
"Requirements for Bunk Beds".
Safety is a cooperative effort between us as the manufacturer, and you as a guardian. Please read and consider the
warnings listed below when choosing a mattress and discussing rules of use with your child.
SAFETY WARNINGS
1. Follow the information on the warnings appearing on the upper bunk end structure and on the
carton. Do not remove warning label from bed.
2. Always use the recommended size mattress or mattress support, or both, to help prevent the
likelihood of entrapment or falls.
3. Surface of mattress must be at least 5 inches (127 mm) below the upper edge of guardrails.
4. Do not allow children under 6 years of age to use the upper bunk.
5. Prohibit more than one person on the upper bunk.
6. Periodically, check and ensure that the guardrail, ladder, and other components are in their
proper position, free from damage, and that all connectors are tight.
7. Do not allow horseplay on or under the bed and prohibit jumping on the bed.
8. Always use the ladder for entering and leaving the upper bunk.
9. Do not use substitute parts. Contact the manufacturer or dealer for replacement parts.
10. Use of a nightlight may provide added safety precaution for a child using the upper bunk.
11. Always use guardrails on both long sides of the upper bunk. If bunk bed will be placed next to
the wall, the guardrail that runs the full length of the bed should be placed against the wall to
prevent entrapment between the bed and wall.
12. The use of water or sleep flotation mattresses is prohibited.
13. Keep these instructions for future reference.
STRANGULATION HAZARD–Never attach or hang items to any part of the
bunk bed that are not designed for use with the bed; for example, but not
limited to, hooks, belts and jump ropes
SIZE OF MATTRESS AND FOUNDATION
Use only mattress, foundation and deck combined which is 74-75 inches long and 37 ½-
38 ½ inches wide on upper bunk. Ensure thickness of mattress and foundation combined
does not exceed 9 inches and mattress and is at least 5 inches below upper edge of
guardrails.
******Replacement parts, including additional guardrails, may be obtained from any
Discovery dealer or directly from us at the below address.
Replacement Parts & Limited Warranty
Discovery World Furniture will replace any component part free of charge for 1 full year via UPS freight collect.
Discovery World Furniture will replace any component part for 50% of the then prevailing retail price plus freight
for the lifetime of the product unless the product has been discontinued from our line. For service, mail your request to:
Discovery World Furniture 2963 Stonewall Place, Sanford, FL 32773. (WWW.discoveryworldfurniture.com)
SAFETY FIRST !!!!!
2963 Stonewall Place, Sanford, Fl 32773
Patent # US 7,832,031 B1

Advertisement

loading
Need help?

Need help?

Do you have a question about the 2914R-0214R and is the answer not in the manual?

Questions and answers

Summary of Contents for Discovery Telecom 2914R-0214R

  • Page 1 SAFETY FIRST !!!!! 2914R-0214R Mission Stair Stepper Bunk Bed All of Discovery's Bunkbeds were designed and manufactured with your child's safety as our top priority. Their unparalleled strength is a bi-product of the safety design. Our bunks meet all compliance with ASTM F 1427-13 “Standard Consumer Safety Specification for Bunk Beds”...
  • Page 2 Stair Stepper Bed Left Side Facing *For Right side facing go to page 08 Tool required Phillips screw driver 3 1/2” 1 1/4” 4” ( For use with power drill) 3 1/2” 3 1/2” 1 3/4” Page 3 1/2” 3 1/2” x 3/8”...
  • Page 3: Parts List

    Parts List Handles and screws in top drawer, install them at any time Magazine Rack Handles and screws in chest’s top drawer No dowel on this side Bottom bed rails Top bed rails Page Page No dowel on this side...
  • Page 4 REMINDER Important note If you want the Stair on the Remove shipping blocks right side please go to page 08 and save screws for next step Tall posts located Install tall posts in rail box #3 Front post Back post Check stamp Check stamp under the post...
  • Page 5 Phillips head screw, use screw driver. Page...
  • Page 6 Setup Top Bed No dowel on this side Always start Install Slat kit assembling slat (Screws in slat box) kit flush with cleat Install guard rail support Page...
  • Page 7 Drop Top Bed in Place Always start assembling slat kit flush with cleat Install Slat kit on bottom bed (Screws in slat box) Install Back Panel Use Phillips head screw on this side Page...
  • Page 8 Mount magazine rack Shown With Optional Full Extension Kit & Trundle OPTIONAL Pre-Assembled 3 Drawer Unit, Simply Slide Under The Bunk Page...
  • Page 9 To Install stair case on the right side follow these steps Remove both post and Remove shipping block transfer it to this side Page Page Instal tall post Remove Drawers...
  • Page 10 Slide Chest out Remove Magazine Rack Turn chest around and slide it back in Slide Drawers back in...
  • Page 11 Setup top bed Install slats Both sides Install Slat kit and guard rail support Make sure that the opening is on the right Insert Magazine Rack side as shown back in and screw it in place Always start assembling slat kit flush with cleat Install Slat kit on bottom bed Page...