Download Print this page

Discovery Telecom 3214 Instruction Manual

Mission stair stepper bunk bed (wood slats)

Advertisement

Quick Links

3214 Mission Stair Stepper Bunk Bed (Wood Slats)
All of Discovery's Bunkbeds were designed and manufactured with your child's safety as our top priority.
Their unparalleled strength is a bi-product of the safety design. Our bunks meet all compliance with
ASTM F 1427-13 "Standard Consumer Safety Specification for Bunk Beds" and Code of Federal
Regulations (CFR) 1213 "Safety Standards for Entrapment Hazards in Bunk Beds" and (CFR) 1513
"Requirements for Bunk Beds".
Safety is a cooperative effort between us as the manufacturer, and you as a guardian. Please read and consider the
warnings listed below when choosing a mattress and discussing rules of use with your child.
SAFETY WARNINGS
1. Follow the information on the warnings appearing on the upper bunk end structure and on the
carton. Do not remove warning label from bed.
2. Always use the recommended size mattress or mattress support, or both, to help prevent the
likelihood of entrapment or falls.
3. Surface of mattress must be at least 5 inches (127 mm) below the upper edge of guardrails.
4. Do not allow children under 6 years of age to use the upper bunk.
5. Prohibit more than one person on the upper bunk.
6. Periodically, check and ensure that the guardrail, ladder, and other components are in their
proper position, free from damage, and that all connectors are tight.
7. Do not allow horseplay on or under the bed and prohibit jumping on the bed.
8. Always use the ladder for entering and leaving the upper bunk.
9. Do not use substitute parts. Contact the manufacturer or dealer for replacement parts.
10. Use of a nightlight may provide added safety precaution for a child using the upper bunk.
11. Always use guardrails on both long sides of the upper bunk. If bunk bed will be placed next to
the wall, the guardrail that runs the full length of the bed should be placed against the wall to
prevent entrapment between the bed and wall.
12. The use of water or sleep flotation mattresses is prohibited.
13. Keep these instructions for future reference.
STRANGULATION HAZARD–Never attach or hang items to any part of the
bunk bed that are not designed for use with the bed; for example, but not
limited to, hooks, belts and jump ropes
SIZE OF MATTRESS AND FOUNDATION
Use only mattress, foundation and deck combined which is 74-75 inches long and 37 ½-
38 ½ inches wide on upper bunk. Ensure thickness of mattress and foundation combined
does not exceed 9 inches and mattress and is at least 5 inches below upper edge of
guardrails.
******Replacement parts, including additional guardrails, may be obtained from any
Discovery dealer or directly from us at the below address.
2963 Stonewall Place, Sanford, Fl 32773
Replacement Parts & Limited Warranty
Discovery World Furniture will replace any component part free of charge for 1 full year via UPS freight collect.
Discovery World Furniture will replace any component part for 50% of the then prevailing retail price plus freight
for the lifetime of the product unless the product has been discontinued from our line. For service, mail your request to:
Discovery World Furniture 2963 Stonewall Place, Sanford, FL 32773. (WWW.discoveryworldfurniture.com)
SAFETY FIRST !!!!!
Patent # US 7,832,031 B1

Advertisement

loading
Need help?

Need help?

Do you have a question about the 3214 and is the answer not in the manual?

Questions and answers

Summary of Contents for Discovery Telecom 3214

  • Page 1 SAFETY FIRST !!!!! 3214 Mission Stair Stepper Bunk Bed (Wood Slats) All of Discovery's Bunkbeds were designed and manufactured with your child's safety as our top priority. Their unparalleled strength is a bi-product of the safety design. Our bunks meet all compliance with ASTM F 1427-13 “Standard Consumer Safety Specification for Bunk Beds”...
  • Page 2 Stair Stepper Bed Left Side Facing *For Right side facing go to page 09 Tool required Phillips screw driver 1 1/4” 1” 3 1/2” 4” 1 3/4” 3 1/2” 3 1/2” 3 1/2” 3 1/2” Knobs Page...
  • Page 3: Parts List

    Parts List Knobs and screws in top drawer, install them at any time Magazine Rack No dowel on this side Bottom bed rails Top bed rails Page No dowel on this side...
  • Page 4 REMINDER Important note If you want the Stair on the Remove shipping blocks right side please go to page 09 and save screws for next step Tall posts located Install tall posts in rail box #3 Front post Back post Check stamp under the post Check stamp...
  • Page 5 Phillips head screw, use screw driver. Page...
  • Page 6 Setup Top Bed No dowel on this side Install Slat kit Always start (Screws in slat box) assembling slat kit flush with cleat Install guard rail support Page...
  • Page 7 Drop Top Bed in Place Always start assembling slat kit flush with cleat Install Slat kit on bottom bed (Screws in slat box) Page...
  • Page 8 Install Back Panel Use Phillips head screw on this side Mount magazine rack Page...
  • Page 9 OPTIONAL Pre-Assembled 3 Drawer Unit, Simply Slide Under The Bunk Shown With Optional Full Extension Kit Trundle over lap rail Page Shown With Optional Extension Kit & Trundle...
  • Page 10 To Install stair case on the right side follow these steps Remove both post and Remove shipping block transfer it to this side Page Instal tall postl Remove Drawers...
  • Page 11 Slide Chest out Remove Magazine Rack Turn chest around and slide it back in Page Slide Drawers back in...
  • Page 12 Setup top bed Install slats Make sure that the opening is on the right side as shown Both side Install Slat kit and guard rail Insert Magazine Rack support back in and screw it in place Always start assembling slat kit flush with cleat Install Slat kit on bottom bed (Screws in slat box)