Download Print this page
Discovery Telecom 0205 Instruction Manual

Discovery Telecom 0205 Instruction Manual

Twin/full student loft bunk bed (metal slats)

Advertisement

Quick Links

Discovery
TM
World Furniture
Twin/Full Student Loft Bunk Bed (Metal Slats)
All of Discovery's Bunk beds were designed and manufactured with your child's safety as our top priority. Their
unparalleled strength is a bi-product of the safety design. Our bunk beds comply with all the ASTM F 1427-13
"Standard Consumer Safety Specification for Bunk Beds" and code of Federal Regulations (CFR) 1213 "Safety Standards
for Entrapment Hazards in Bunk Beds" and (CFR) 1513 "Requirements for Bunk Beds".
Safety is a cooperative effort between us as the manufacturer, and as a guardian. Please read and consider the warnings listed
below when choosing a mattress and discussing rules of use with your child.
SAFETY WARNINGS
1. Follow the information on the warning labels appearing on the upper bunk end structure and on the carton.
Do not remove warning label from bed.
2. Always use the recommended size mattress or mattress support, or both, to help prevent the
likelihood of entrapment or falls.
3. Surface of mattress must be at least 5 inches (127mm) below the upper edge of guardrails.
4. Do not allow children under 6 years of age to use the upper bunk.
5. Prohibit more than one person on top bunk.
6. Periodically, check and ensure that the guardrail, ladder , and other components are in their proper
position, free from damage, and that all connectors are tight.
7. Do not allow horseplay on or under the bed and prohibit jumping on the bed.
8. Always use ladder for entering and leaving the upper bunk.
9. Do not use substitute parts. Contact the manufacturer or dealer for replacement parts.
10. Use of a night light may provide added safety precaution for child using the upper bunk.
11. Always use guardrails on both long side of the upper bunk. If bunk bed will be place next to the
wall, the guardrail that runs the full length of the bed should be placed against the wall to prevent
entrapment between the bed and the wall.
12. The use of water or flotation mattress is prohibited.
13. Keep these instructions for future reference.
STRANGULATION HAZARD
-Never attach or hang items to any part of the bunk bed that are not designed
for use with the bed; for example, but not limited to, hooks, belts and jump ropes.
SIZE OF MATTRESS AND FOUNDATION
Use only Twin or Full Mattress with the following specifications on upper & lower bunks
Twin Mattress :37 1/2" - 38 1/2" Wide x 74"-75" long
Full Mattress :52 1/2" - 53 1/2" Wide x 74"-75" long
Ensure thickness of mattress and foundation combined does not exceed 9 inches and the mattress is
at least 5 inches below the upper edge of guard rails.
******Replacement parts, including additional guardrails, may be obtained from any
Discovery World Furniture dealer or directly from us at the below address.
0205 2905R 3205
(White)
(Espresso) (Charcoal)
SAFETY FIRST !!!!!
Website www.discoveryworldfurniture.com
2963 Stonewall Road
Sanford, Fl 32773

Advertisement

loading
Need help?

Need help?

Do you have a question about the 0205 and is the answer not in the manual?

Questions and answers

Summary of Contents for Discovery Telecom 0205

  • Page 1 0205 2905R 3205 Discovery (White) (Espresso) (Charcoal) World Furniture SAFETY FIRST !!!!! Twin/Full Student Loft Bunk Bed (Metal Slats) All of Discovery’s Bunk beds were designed and manufactured with your child’s safety as our top priority. Their unparalleled strength is a bi-product of the safety design. Our bunk beds comply with all the ASTM F 1427-13 “Standard Consumer Safety Specification for Bunk Beds”...
  • Page 2 0205 2905R 3205 (White) (Espresso) (Charcoal) 1/4”x 4 1/4” Allen Wrench 1/4”x 4” 1 1/4” 1 9/16” 1/4” 1 1/2” 1/4”x 2” 2” Shelf pin Allen bit Half moon nut Requires a phillips screw driver not included Replacement Parts & Limited Lifetime Warranty Discovery World Furniture will replace any component part free of charge for 1 full year via UPS freight collect.
  • Page 3 Back Rail Drawer Chest Shell Without drawers Center Support...
  • Page 4 Use guardrails on both sides of upper bunk.
  • Page 5 “Please ensure that the warning label faces the inside of the bed." Back bed post Front bed post Back bed post Front bed post Find knobs in top drawer Allen Wrench...
  • Page 6 “Please ensure that the warning label faces the inside of the bed." Repeat step on all 4 corners Install rails & back guard rail Allen Wrench Assemble front guard rail (Instructions and hardware in box5) Install front guard rail Allen Wrench Install guard rail support...
  • Page 7 Attach bed to the chest Install slat kit Find these screws in slat box. Install shelves Always start here...
  • Page 8 Assemble the ladder (Instructions and hardware in box 5) Attach ladder Assemble bottom bed Repeat step on all 4 corners Allen Wrench...
  • Page 9 Install slat kit Screws in slat box. Always start here Install center support Hold the center support under the slats, center it on the bed and screw it on both sides using the screws supplied...
  • Page 10 “Please ensure that the warning label faces the inside of the bed." rdra both side s of “Please ensure that the warning label faces the inside of the bed." Shown with chest on the right side...

This manual is also suitable for:

2905r3205