File And Directory Management - Alcatel-Lucent OmniSwitch 6850-48 Management Manual

Managing System Files

File and Directory Management

A number of CLI commands allow you to manage files on your switch by grouping them into sub-
directories within the switch's flash directory. These commands perform the same functions as file
management software applications (such as Microsoft Explorer) perform on a workstation. For
documentation purposes, we have categorized the commands into the following three groups.
•
Directory commands allow you to create, copy, move, remove, rename, and display directories.
•
File commands allow you copy, secure copy, edit, rename, remove, change, and display file attributes.
•
Utility commands display memory and system diagnostic information.
The following illustration represents a sample flash directory that contains three directories and six files at
the top level. The sample working directory and the certified directory both hold five files. The sample
network directory holds one file.This sample flash directory is used in the explanations of the directory,
file and utility CLI commands described in the following section.
The switch may show files and directories different from the ones shown in this example.
boot.params
cs_system.pmd
boot.slot.cfg
Working Directory
Kadvrout.img
Ksecu.img
Kbase.img
Kos.img
OmniSwitch AOS Release 6 Switch Management Guide
Sample Flash Directory
Flash Files
boot.cfg.1.err
swlog1.log
swlog2.log
boot.cfg
boot.params
Network Directory
Certified Directory
Ksecu.img
Krelease.img
September 2009
File and Directory Management
policy.cfg
Kos.img
Kbase.img
boot.cfg
boot.params
page 1-5