File Management Specifications - Alcatel-Lucent OmniSwitch 6850-48 Management Manual

File Management Specifications

File Management Specifications
The functionality described in this chapter is supported on the OmniSwitch Series switches unless other-
wise stated in the following Specifications table or specifically noted within any section of this chapter.
File Transfer Methods
Switch Software Utility
Configuration Recovery
Switch /flash Directory
File/Directory Name Metrics
File/Directory Name Characters Character types are limited to a-z, A-Z, 0-9, dashes (-), dots (.), and
Maximum Number of
Files/Directories
Sub-Directories
Text Editing
System Clock
System Date Default Value
page 1-2
FTP, FTPv6, TFTP , Zmodem.
OmniSwitch as an FTP Client, FTP server or
TFTP Client.
The flash/certified directory holds configurations that are certified as
the default start-up files for the switch. They will be used in the event of
a non-specified reload.
•
64 MB flash memory available for switch files and directories
(OmniSwitch 6850)
•
128 MB flash memory available for switch files and directories
(OmniSwitch 6400, 6855, 9000, 9000E )
•
Contains the /certified and /working directories.
•
32 characters maximum for directory and file names
(OmniSwitch 6400, 6850, 6855)
•
128 characters maximum for directory and file names
(OmniSwitch 9000, 9000E )
•
255 character maximum for a fully qualified path
underlines (_).
Maximum of 244 files and/or directories allowed in the root (flash)
directory.
Up to seven sub-directories allowed including /flash.
Vi standard UNIX editor. The Ed standard UNIX editor is available in
the debug mode.
Set local date, time and time zone, Universal Time Coordinate (UTC),
Daylight Savings (DST or summertime).
THU JAN 01 1970 (Thursday, January 1, 1970)
OmniSwitch AOS Release 6 Switch Management Guide
Managing System Files
September 2009