Operation; Opening And Closing The Door - Tecno-gaz EkstraPLUS PT002TTM Instructions For Use Manual

ENGLISH
ALWAYS SWITCH THE MACHINE ON BEFORE FILLING THE TANKS
MAKE SURE THE TANK DRAIN VALVES (Fig. 9) ARE CLOSED.
The device must be switched for the filling operations and the next option must be displayed:
'CYCLE SELECTION (Para. 7.3 Screen B).
7
Once the connections are made and the maintenance liquids have been poured, the
device is ready for operation.
7.1

Opening and closing the door

The door lock snaps open without a handle.
- The door is closed by simply pushing it upwards until the latch enters the relative outlet (Fig. 17a);
- Pressing the part near latch of the door will snap the lock closed; refer to (Fig. 17b). Once the door
islet go, it remains closed against the guard.
Fig.17a
14
Detergent
Fig. 16

OPERATION

Lift the cap of the liquid that is to be
topped-up;
Oil
Pour the liquid (preferably using a
funnel) until a beep and visual signal
(on the display) indicate that the
tank is full.
Fig.17b