MEE X20 Setup Manual page 10

PAIRING NEW DEVICES
When removed from the charging case, the X20 will automatically enter Bluetooth
pairing mode if a previously paired device is not found. Select "MEE audio X20" in the
Bluetooth menu of the new device you wish to pair to complete the pairing process.
To manually enter pairing mode:
Remove right earpiece from case, press and hold
the touch panel for 10 seconds to power it off,
release the touch panel, then press and hold it again
for 5 seconds again until the blue and white lights
flash indicating pairing mode.
Earpiece Indicator Lights
Pairing mode is
indicated by flashing
alternating blue and
white lights
Select "MEE audio X20"
in the Bluetooth menu of
the new device you wish
to pair to complete the
pairing process.
AT&T LTE 12:26 PM
Settings Bluetooth
Bluetooth
MEE audio X20
95%