Advertisement
5
To complete the cage
assembly, you will need
these pieces:
× 4
× 4
× 8
6
To add the PLATFORMS,
you will need these pieces:
× 2
× 1
7501 — 07/15 — USL
Hammocks and platforms may
For solid platforms, make sure
be placed at different levels,
they clip fully into place on
but for best results, add them
the cage wires for maximum
to the interior at the positions
stability.
illustrated here.
Made in China for Prevue Pet Products, Inc., Chicago IL USA
To solidify the entire cage, press a connector
onto each panel intersection until it clicks
and all surfaces are flush.
T
"
" clips connect the intersections
along the front and back top edge.
+
"
" clips connect the intersection
of panels on the front and back.
Base clips connect the cage to the
CLICK
base. Hook the "claw" end of the
clip onto the short horizontal wire.
Press your thumb into the dimple
of the clip and press down until it
clicks into the slot on the cage base.
Your cage is now fully
assembled and ready for use.
www.prevuepet.com
800 243-3624
@
customerservice
prevuepet.com
Advertisement
