Prevue Pet Products 7501 Quick Start Manual

Deluxe
Cat Home
3 Levels
Model: # 7501
1
To assemble the BASE,
you will need these pieces:
× 4
2
To assemble the LOWER
SECTION, you will need
these pieces:
× 4
(connector rails )
7501 — 07/15 — USL
read first
• No tools are required for assembly
• One person will be able to assemble
this deluxe cat home
• For best results, follow steps in order
Turn the base over
and insert
rolling casters.
Locate the four panels with short
horizontal bars along the lower edge.
Stand the side panel into the base.
Hold the back panel in place.
Note: Orient the panel with the thick
horizontal wires to the cage exterior.
Thinner vertical wires face the cage
interior.
Slide a connector rail down over
the two-panel seam [see Fig. 2.1 and
Fig. 2.2 ] until the tops are flush.
Note: The flat surface of the connector
rail faces the exterior. The rounded
surface faces the interior.
Continue around the cage,
adding the side and front panels
and attaching panels with the
connector rails.
Made in China for Prevue Pet Products, Inc., Chicago IL USA
REVIEW BEFORE ASSEMBLY
For assistance or replacement parts,
please contact Prevue Pet Products:
312.243.3624
PHONE
www.prevuepet.com
ONLINE
customerservice@prevuepet.com
EMAIL
www.prevuepet.com
T IP:
When When
OFF ON
is up, is up,
casters casters
ROLL LOCK
[ FIG. 2.1]
EXTERIOR
INTERIOR
[ FIG. 2.2 ]
Showing Fig. 2.1 as
viewed from above
@
800 243-3624 customerservice prevuepet.com