Steinbach Poolrunner Original Owner's Manual page 42

1. Switch off the device after the end of the cleaning program.
2. Disconnect the control unit from the power supply and the device.
3. Lift the device out of the pool.
4. Clean the filter unit and the device.
Switching off the device
1. Press the ON/OFF button
The device is switched off and all indicators
Press the ON/OFF button
up.
Disconnecting the control unit
Handling the power plug with wet hands can lead to an electric
shock.
- Never touch the power plug with wet hands.
1. Disconnect the power plug from the grounded socket.
2. Undo the screw fitting of the plug on
the control unit
floating cable
The control unit is disconnected.
42
.
12
Risk of electric shock!
and pull of the
5
.
1
are off.
10
to stop cleaning the device before the time is
12
WARNING!
14
5
1