Download Print this page
Warmup WSM-252W Instruction Manual

Warmup WSM-252W Instruction Manual

Hide thumbs Also See for WSM-252W:

Advertisement

Quick Links

The world's best-selling electric floor heating brand
WSM-252W Instruction manual
warmup.com | (888) 927-6333

Advertisement

loading
Need help?

Need help?

Do you have a question about the WSM-252W and is the answer not in the manual?

Questions and answers

Summary of Contents for Warmup WSM-252W

  • Page 1 ™ The world’s best-selling electric floor heating brand WSM-252W Instruction manual warmup.com | (888) 927-6333...
  • Page 2 Product Description The Warmup WSM-252W is a WiFi- NEMA 1 for indoor Enclosure enabled panel to operate your in-ground mounting snow melting system. The panel contains Two (2) 64A/4P relays load switching capabilities (up to 252 Relays with 120V Amps/240V) and is triggered by the weather...
  • Page 3 The timer can be set from 1 to 99 system (at 240V). Adjust inbound voltage hours and Warmup defaults the timer at 1 based on power requirement of WSM/ period of 10 hours. We do not recommend WSMM snow melting system.
  • Page 4 Smartphone Application To activate your WSM-252W automatically as it was designed to be, you must first download the Warmup WSM application available in your iOS or Android app store. Upon download, verify that your system is properly wired and powered so that it can emit the necessary signals to your home’s...
  • Page 5 This is simply to return your phone to its original set-up. The temporary switch to the ZKB network allowed the WSM-252W to pair up with your phone specifically and it will now link directly with your home’s router.
  • Page 6 Default parameters have been preloaded for a typical snow melting system. You can click on the EDIT icon (pen and paper) of your snow melting system and change the following: EDIT NAME If you wish to change the name of your system you can do it here.
  • Page 7 BELOW 0°F It is recommended to not allow the system to function when outdoor temperatures are below 0°F / -18°C. This is because the power required to heat the slab to 40°F is simply too great and it is possible that the system may not cope with the requirement.
  • Page 8 Wiring diagram See warmupedia.com for additional wiring diagrams when using secondary sensors (ETO2 and ASE-DS) SUPPORT Online warmupedia.warmup.com/products/wsm-252w-smart-WiFi-panel Technical Helpline (888) 927-6333...