Table of Contents
Advertisement
Special Vehicle Notes: Radio Reception for Toyota vehicles
For all Toyota vehicles that use the older style one pin Radio Antenna plug, you will need to attach
either the
Antenna control wire
Antenna Control wire on the Toyota OEM plug:
The Toyota double din chassis will attach to most vehicle's OEM brackets*.
Before putting your dash back together it is best to attach the screen and test all
functions.
Some vehicles will require a fascia to fill the gap around the Toyota double din
chassis.
Do not forget to remove the transportation screws before installing
*Some OEM brackets may have to be modified in order to line the brackets up
on the Toyotaluxx. For example, the 79 series brackets need to be filed down you
(see below):
1300 555 514
with a standard radio connection
or the
Amp Control wire
Attach the amp control wire from the Luxx harness to the wire
coming from this pin.
Cut the blue wire from the Radio Antenna adaptor on the Luxx
harness and attach to the wire coming from this pin
Mounting the unit
(from the Luxx power loom) to the
Or
File down the parts
highlighted in red
11
Advertisement
Table of Contents
