Tape Playback - Aiwa XR-EM200 Operating Instructions Manual

TAPE PLAYBACK

SYNCHRO REC
REC START/
PAUSE
f,g
Playback
Use only type I (normal) tapes.
1 Press zPUSH EJECT to open the cassette holder.
2 Insert the tape.
Insert with the exposed side down, and press zPUSH
EJECT to close the cassette holder.
3 Press cTAPE (REC MUTING) (dTAPE on the
remote) to start play.
12
cTAPE
(REC MUTING)
AUX
s
zPUSH
dTAPE
EJECT
SHIFT
To stop playback
Press s.
To rewind or fast forward
Press f or g.
To reset the tape counter
Press s in stop mode, and the tape counter in the display is
reset to "0000".
Opening and closing the cassette holder will also reset the
tape counter.
To eject the tape
Press z PUSH EJECT after the deck stops completely.
Notes on cassettes
•Use of a tape longer than 90 minutes is not recommended
since they are extremely thin and easily damaged. If you
should use one, do not change the tape operations such as
play and stop frequently.
•Take up any slack in the tape with a pencil or similar tool
before use. Slack tape may get entangled in the deck
mechanism and become damaged.
f,g
s