Tennant T290 Quick Manual
Push model
Hide thumbs
Also See for T290:
- Service manual (74 pages) ,
- Operator's manual (20 pages) ,
- Quick manual (2 pages)
Advertisement
Quick Links
This guide is intended for quick consultation only and does not replace the user and maintenance manual.
Before using the machine, read the user and maintenance manual contained in the machine's packaging thoroughly and strictly follow all the
instructions.
1
H2O
CHEM
+
4
T290 (Push Model)
Quick Guide
PREPARATION & OPERATION
2
HO
5
is not successful, repeat by pressing on the lever again and repeating the centring.
Removing the brush: raise the machine head by pushing the head lift pedal down and then to the right and operate
the brush/drive lever repeatedly. After operating the lever a few times, the brush is released and falls to the ground.
2
ON
ATTACHING/REMOVING THE BRUSHES
EN
3
6
HO
2
Advertisement
Related Manuals for Tennant T290
Summary of Contents for Tennant T290
- Page 1 T290 (Push Model) Quick Guide This guide is intended for quick consultation only and does not replace the user and maintenance manual. Before using the machine, read the user and maintenance manual contained in the machine’s packaging thoroughly and strictly follow all the instructions.
- Page 2 Check that the brush Check that the Clean the dirty is clean. Replace if water tank. undamaged and clean. necessary. is clean. BATTERY CHARGER ON BOARD Check that the squeegee is clean and the blades are not worn. Open the clip (Ref. 1). Remove the two blade retainers (Ref.