Device/Hardware Configuration In The Tia Portal; Profinet Device Configuration - Siemens SIPLUS HCS Operating Instructions Manual

Configuration

8.3 Device/hardware configuration in the TIA Portal

8.3 Device/hardware configuration in the TIA Portal
8.3.1

PROFINET device configuration

Device configuration
In the case of PROFINET, the structure of the hardware is mirrored in the TIA device
configuration:
Slot num-
ber
The configuration rules are as follows:
CIM
Slot 0 represents the PROFINET connection with the two ports. The CIM has a slot for one
I/O module. The CIM module and the CIM I/O module are assigned to slot 1 and are
designed as submodules. If an I/O module is not used, subslot 1.2 remains empty.
POM
A maximum of 24 POMs can be operated on one CIM.
Note
The device configuration in the project engineering must match the configuration of the HCS
that actually exists.
Otherwise no startup can take place.
66
CIM
0 (PROFINET IO)
1 CIM head
Subslot 1.1
I/O module
Subslot 1.2
POM 1 POM 2 POM 3
2 3 4
Operating Instructions, 11/2015, A5E35066204A/RS-AA/002
... Final POM
n
SIPLUS HCS4200