Siemens SIPLUS HCS Operating Instructions Manual page 17

Features
● Modular (central) design
● Communication over PROFINET or PROFIBUS
● Parameterization, commissioning, visualization and diagnostics via the Siemens TIA
Portal
● Integrated diagnostic and monitoring functions
● Control modes: Half-wave control and soft start
● Connection of incoming supply through 3-pole connector on the front of the POM
● Connection of power outputs via two 8-pin or 6-pin connectors on the front of the POM
● Only one 24 V feed is necessary for up to 12 POMs (when using one rack) or 24 POMs
(when using a double rack)
● Slot for an I/O module
SIPLUS HCS4200
Operating Instructions, 11/2015, A5E35066204A/RS-AA/002
System overview
3.2 Features
17