Process and system messages, error handling
11.2 Power Output Module (POM)
11.2
Power Output Module (POM)
11.2.1
LED operating display for POM
The device has 3 LEDs on the front: The LEDs provide information about the operating
status of the device/system.
Meaning of LEDs
READY
green
Channel error
108
HEATING ON
ERROR
yellow
red
Description
red
LED x off: Channel x is OK
LED x on: Channel x error
Description
Power OFF, device switched off
Initialization: The LED flashes until the device is detected and
addressed by the CIM.
The device is ready.
Heating "ON"
A general fault has occurred, e.g. communication, system volt-
age, temperature
Operating Instructions, 11/2015, A5E35066204A/RS-AA/002
SIPLUS HCS4200