Zte AXON 10 PRO Quick Start Manual page 9

NOTE:
The nano-SIM card slot supports 5G/4G/3G/2G networks.
Charging the Phone
Your phone's battery should have enough power for the
phone to turn on, find a signal, and make a few calls. You
should fully charge the battery as soon as possible.
WARNING!
Use only ZTE-approved chargers and USB Type-C cables.
The use of unapproved accessories could damage your
phone or cause the battery to explode.
NOTES:
Use the charger that comes in-box with your phone to

charge the battery. It's specially built to support Quick
Charge.
Your phone is also compatible with wireless charging

devices approved by ZTE, which are sold separately.
WARNING!
Do not remove the back cover. The battery is not
removable. Removal may cause fire or explosion.
1. Connect the adapter to the USB Type-C jack.
2. Connect the charger to a standard AC power outlet.
3. Disconnect the charger when the battery is fully
charged.
NOTE:
If the battery is extremely low, you may be unable to
power on the phone even when it is being charged. In this
case, try again after charging the phone for at least 30
7