Asus AAEON BOXER-8240AI User Manual page 53

Alternatively, the power mode can be managed and changed remotely with a
third-party JTOP tool (usually requires between 200 MB and 300 MB storage space).
To install the JTOP tool, enter the following commands in terminal:
$ sudo apt-get install -y python3-pip
$ sudo python3 -m pip install jetson-stats
Once the tool is installed, it can be accessed in terminal with the command:
$ sudo jtop
Users can control the power mode with the interface.
Chapter 4 – ACLinux User Guide 41