SR 580 Helmet with Visor • If the fan is not running. In this abnormal situation, the 1. General information equipment will provide no protection. In addition, there is 2. Parts risk of carbon dioxide quickly accumulating in the head top, 3.
4.1 Cleaning Packing list • Helmet Sundström cleaning tissues SR 5226 are recommended for • Breathing hose daily care. • User instructions If the equipment is more heavily fouled, use a soft brush or • Cleaning tissue sponge moistened with a solution of water and dishwashing detergent or the like.
• Fit the visor into the lower visor frame. Applying a little water 6. Key to symbols to the seal will make fitting easier (fig.6). • Fit the lower visor frame to the helmet by sliding it into position. A ‘click’ indicates that is locked in position See user instructions (fig.
Page 6
ATEX-codes: II 2 G Ex ib IIA T3 Gb II 2 D Ex ib IIIC T195°C Db Key to ATEX markings: Explosion protection mark. Equipment group (explosive atmospheres other than mines with fire damp). Equipment category (2 = High level of protection for Zone 1, G = Gas).
Page 12
The head-top SR 580 is manufactured within a quality management system accepted by Notified Bodies: 2849: INSPEC International B.V., Beechavenue 54-62, 1119 PW, Schiphol-Rijk, The Netherlands. 0402: RISE, Brinellgatan 4, 504 62 Borås, Sverige Sundström Safety AB SE-341 50 Lagan • Sweden Tel: +46 10 484 87 00 info@srsafety.se •...
Need help?
Do you have a question about the SR 580 and is the answer not in the manual?
Questions and answers