Inserting Dry Cell Batteries - Aiwa HS-SP970 Operating Instructions Manual

INSERTING DRY CELL
m
BATTERIES +
Open the battery compartment inside the unit and
insert two size AA (R6) batteries with the ~ and O
marks correctly aligned.
Battery replacement + E
Replace the batteries with new ones when the OPE/
BATT indicator becomes dim.
Before replacing the batteries, be sure to turn off
the power to prevent the erasure of preset station
memories and exercise calculation.
The unit retains the preset station memories for
about 1 minute without batteries. To prevent the
erasure of the memories, replace the batteries
quickly.
Note on dry cell batteries
Make sure that the @ and 0 marks are correctly
aligned.
Do not mix different types of batteries, or an old
battery with a new one.
Never recharge the batteries, apply heat to them or
take them apart.
When not using the batteries, remove them to
prevent needless wear.
If liquid leaks from the batteries, wipe thoroughly to
remove.
Using on AC house current -+
Connect the optional AC adaptor Aiwa AC-620/
AC-302.