Table of Contents
Advertisement
Updating Firmware
If essential operating updates are made to the
G0922 firmware, the updated firmware will be
available at www.grizzly.com on the G0922 prod-
uct page.
Tools Needed
Windows Computer with Grizzly Winware ......... 1
USB Type B Cable ............................................ 1
To update firmware:
1.
On computer, download latest firmware
update from www.grizzly.com.
Note: Firmware files will have the ".HEX" file
extension.
2.
Connect printer to computer using type B
USB cable.
3.
Open Grizzly Winware software, select active
printer, then navigate to "Manage Printers"
(see Figure 65). Printer preferences window
will open.
Active Printer
Manage Printers
Figure 65. Active printer menu.
Model G0922 (Mfd. Since 07/20)
4.
Highlight correct printer, then select Upgrade
Firmware (see Figure 66). Upgrade Firmware
window will open.
Qty
Figure 66. Printer preferences window.
5.
Select Upload Custom Firmware (see Figure
67). A file selection window will open.
Figure 67. Upgrade Firmware window.
6.
Within file selection window, navigate to
.HEX file downloaded in Step 1. Highlight file
and select "Open." A progress bar will show
installation progress.
7.
Once installation is complete, disconnect
printer from computer.
Upgrade Firmware
Button
List of Printers
Upload Custom
Firmware
-43-
Advertisement
Table of Contents
