Installing Software - Grizzly G0922 Owner's Manual

7. Slide guide tube over Bowden tube.
8. Install Bowden tube to print head by pressing
down on tube coupler and inserting tube (see
Figure 11).
Figure 11. Example of installing Bowden tube to
print head.
9. Install (3) cord clips to guide tube and wiring
harness.
10. Place spool holder on back of machine and
secure with M3-.5 x 12 button head cap
screw.
If you are not experienced with this type
of machine, WE STRONGLY RECOMMEND
that you seek additional training outside of
this manual. Read books/magazines or get
formal training before beginning any proj-
ects. Regardless of the content in this sec-
tion, Grizzly Industrial will not be held liable
for accidents caused by lack of training.
-18-

Installing Software

Grizzly Winware slicer software is included on the
SD card that comes with the Model G0922.
Note: We recommend backing up the installation
Guide
Tube files by copying them from the included SD card to
a location on your computer. If installation files are
lost, they can also be downloaded from the G0922
product page at www.grizzly.com.
Bowden
Tube
To install slicer software:
1.
Insert SD card into SD-USB adapter, then
Tube
insert adapter into PC.
Coupler
2. On the SD card, navigate to and open .EXE
installation file.
3. Follow directions in installation wizard.
4. When opening software for first time, select
Model G0922 as the default printer.
Model G0922 (Mfd. Since 07/20)