Land Pride SBP1164 Operator's Manual
  1. Manuals
  2. Brands
  3. Land Pride Manuals
  4. Snow Blower
  5. SBP1164
  6. Operator's manual
Land Pride SBP1164 Operator's Manual

Land Pride SBP1164 Operator's Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Snow Blower
Models SBP1164 and SBP1174
81628
Table of Contents
Model SBP1164 Shown with Optional Hydraulic Chute Rotation
Operator's Manual
Read the Operator's Manual entirely. When you see this symbol,
!
the subsequent instructions and warnings are serious - follow
without exception. Your life and the lives of others depend on it!
Cover photo may show optional equipment not supplied
with standard unit.
For an Operator's Manual and Decal Kit in French
Language, please see your Land Pride dealer.
370-839M
Printed 7/31/24

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SBP1164 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Land Pride SBP1164

Summary of Contents for Land Pride SBP1164

  • Page 1 Table of Contents Snow Blower Models SBP1164 and SBP1174 81628 Model SBP1164 Shown with Optional Hydraulic Chute Rotation 370-839M Operator’s Manual Read the Operator’s Manual entirely. When you see this symbol, the subsequent instructions and warnings are serious - follow without exception.

  • Page 2: Machine Identification

    Serial Number Machine Height Machine Length Machine Width Machine Weight Delivery Date First Operation Accessories Dealer Contact Information Name: Street: City/State: Telephone: Email: California Proposition 65 WARNING: Cancer and reproductive harm - www.P65Warnings.ca.gov Models SBP1164 and SBP1174 Snow Blower 370-839M 7/31/24...
  • Page 3 Land Pride assumes no responsibility for errors or omissions. Neither is any liability assumed for damages resulting from the use of the information contained herein. Land Pride reserves the right to revise and improve its products as it sees fit. This publication describes the state of this product at the time of its publication, and may not reflect the product in the future.
  • Page 4 Download the appropriate for Land Pride products. App on your smart phone. Scan the QR Refer to Parts Manual QR code and take a picture. Locator on this page for detailed instructions. Models SBP1164 and SBP1174 Snow Blower 370-839M 7/31/24...

  • Page 5: Safety At All Times

     Important Safety Information Important Safety Information Listed below are common practices that may or may not be applicable to the products described in this manual. Safety at All Times Look for the Safety Alert Symbol Careful operation is your best The SAFETY ALERT SYMBOL indicates there is a potential hazard assurance against an accident.
  • Page 6  Lower implement to the ground and  Replace parts on this implement using the correct tools and follow all shutdown procedures with genuine Land Pride parts only. equipment. before leaving the operator’s seat to Do not alter this implement in a way ...
  • Page 7 Use Seat Belt and ROPS Keep Riders Off Lights and Devices Machinery  Land Pride recommends the use of a CAB or roll-over-protective-  Never carry riders on the tractor or  A slow moving power machine structures (ROPS) and seat belt implement.

  • Page 8: Important Safety Information

    Important Safety Information Listed below are common practices that may or may not be applicable to the products described in this manual.  Be aware of and follow OSHA  If possible, change into disposable Avoid Crystalline Silica (or other local, State, or Federal) or washable work clothes at the (Quartz) Dust work site;...
  • Page 9 Important Safety Information This page left blank intentionally. 7/31/24...

  • Page 10: Safety Labels

    Spray soapy water onto the cleaned area. all damaged or missing labels. Order new labels from your Peel backing from label and press label firmly onto the nearest Land Pride dealer. To find your nearest dealer, surface. visit our dealer locator at www.landpride.com.
  • Page 11 1 Place: On the back fan shield 70247 81633 858-148C Warning: Pinch Point Hazard 1 Place: On the back fan shield 70247 81634 858-148C Warning: Pinch Point Hazard 3 Places: On the front 7/31/24 Models SBP1164 and SBP1174 Snow Blower 370-839M...
  • Page 12 81633 848-840C Danger: Entering Discharge Chute Hazard 1 Place: Just below the discharge chute opening 81628 70640 81632 818-132C Danger: Thrown Object Hazard 2 Places: On both sides of the discharge chute Models SBP1164 and SBP1174 Snow Blower 370-839M 7/31/24...
  • Page 13 2 Places: On both sides of the back 70642 81696 Driveshaft guards 818-522C Danger: Guard Missing Hazard: 2 Places: Beneath driveshaft guards 70641 81628 848-747C Warning: High Pressure Fluid Hazard 1 Place: On the front left side 7/31/24 Models SBP1164 and SBP1174 Snow Blower 370-839M...
  • Page 14 Danger: Guard Missing - DO NOT Operate 1 Place: On the 3-point driveline outer profile 70375 22296 818-552C Danger: Rotating Driveline - Keep Away 1 Place: On the 3-point driveline outer shield Models SBP1164 and SBP1174 Snow Blower 370-839M 7/31/24...

  • Page 15: Using This Manual

    (18.6 to 41 kW) with a Cat. l 3-point hitch and are Quick Hitch compatible. The SBP1164 is capable of cutting a path in the snow 63 1/2" (161 cm) wide and the SBP1174 can cut a path 73" 1/2" (187 cm) wide. An optional hand crank or hydraulic motor must be included for rotating the discharge chute up to 245 degrees.

  • Page 16: Tractor Requirements

    Horsepower Requirements: SBP1164 ....25-55 hp (18.6-21 kW) Have a minimum of two people available during assembly.

  • Page 17: Install Discharge Chute

    NOTE: Spacers (#7 & #8) should be spaced as far out as possibler to avoid any contact with the chute’s geared flange (#4). 9. Tighten all bolts (#3) to the correct torque. Install Discharge Chute Figure 1-1 7/31/24 Models SBP1164 and SBP1174 Snow Blower 370-839M...
  • Page 18 3. Secure hex socket bolt (#22) with nylock nut (#23). Tighten nylock nut to the correct torque. 4. Continue on next page. Universal Rotation Crank Assembly Figure 1-4 Models SBP1164 and SBP1174 Snow Blower 370-839M 7/31/24...
  • Page 19 (#16, #18, & #19) will be after “Adjust Hydraulic 2. Place motor spacer (#9) on top of motor (#10) as Chute Rotation” on page 25. Continue with shown. “Hydraulic Hose Assembly” on page 16. 7/31/24 Models SBP1164 and SBP1174 Snow Blower 370-839M...
  • Page 20 Secure bolts (#2) with removed nuts (#3). Tighten nuts to the correct torque. 8. Rotate input shaft guard (#6) down. 9. Support driveline (#1) with support chain (#5) by snapping its spring hook into a hole in the A-frame. Models SBP1164 and SBP1174 Snow Blower 370-839M 7/31/24...
  • Page 21 (A), and back surface of steel cutting See Detail A edge is against raised lip (B) as shown in Detail A. Attach Tivar Cutting Edge Assembly 5. Tighten all nine nuts (#2) to the correct torque. Figure 1-11 7/31/24 Models SBP1164 and SBP1174 Snow Blower 370-839M...

  • Page 22: Section 2: Connect & Disconnect

    DANGER To prevent serious injury or death: NOTE: Land Pride’s Quick Hitch can be attached to • Do not engage power take-off while connecting or the tractor to provide quick and easy 3-point disconnecting the driveline, or while someone is standing connection and disconnection.
  • Page 23 Re-tighten bolt (#12). 10. Continue with “Check Driveline Interference” on page 21. Support looped end of hydraulic hoses (#11) to the Snow Blower with zip ties. Zip ties not shown. 7/31/24 Models SBP1164 and SBP1174 Snow Blower 370-839M...

  • Page 24: Check Driveline Collapsible Length

    Make sure “Check Driveline Collapsible Length” page 20. on page 20 has been completed. 2. If attached, unhook the driveline from the tractor and implement. 3. If assembled, pull outer and inner driveline profiles apart. Models SBP1164 and SBP1174 Snow Blower 370-839M 7/31/24...

  • Page 25: Check Driveline Interference

    If there is an interference: a. Back implement over the support blocks and lower it onto the blocks. 7/31/24 Models SBP1164 and SBP1174 Snow Blower 370-839M...
  • Page 26 4. Store quick couplers in hose support (#13) by hitch or with the tractor. inserting couplers through the large opening and then sliding the couplers down. 5. Install dust caps (#16) on the quick couplers (#10). Models SBP1164 and SBP1174 Snow Blower 370-839M 7/31/24...
  • Page 27 (#4) and park stand (#1). damaging park stand (#1). 8. The tractor can now be disconnected from the Snow Blower. Refer to “Disconnect Snow Blower” on page 22. 7/31/24 Models SBP1164 and SBP1174 Snow Blower 370-839M...
  • Page 28 To prevent serious injury or death: bolt (#12), and install hairpin cotter (#5). Check full lifting range of the snowblower to ensure chute handle (#14) clears the operator’s area in all positions. Models SBP1164 and SBP1174 Snow Blower 370-839M 7/31/24...
  • Page 29 Adjust Hydraulic Chute Rotation repeat steps 1 to 6 above. Figure 3-3 Install gear shield (#6) with 1/4"-20 x 3/4" GR5 bolts (#7), lock washers (#3) and nuts (#2). Tighten nuts to the correct torque. 7/31/24 Models SBP1164 and SBP1174 Snow Blower 370-839M...
  • Page 30 Upper hole (C) for 1" (25 mm) clearance. deflector (#1) may drift from this position. 5. Secure skid shoes (#1) with lock washers (#3) and nuts (#4). Tighten nuts to the correct torque for 1/2"-13 GR5 bolt. Models SBP1164 and SBP1174 Snow Blower 370-839M 7/31/24...
  • Page 31 Up will tighten the chain. • Down will loosen the chain. 5. Hold sprocket (#2) in its new position and tighten nut (#1) to the correct torque for a 5/8"-11 GR5 bolt. 7/31/24 Models SBP1164 and SBP1174 Snow Blower 370-839M...
  • Page 32 3-point lift arms up or down to level the Snow Blower from left to right. 4. Move spirit level (#1) to position (#2). Manually adjust length of center 3-point link to level the Snow Blower from front to back. Models SBP1164 and SBP1174 Snow Blower 370-839M 7/31/24...

  • Page 33: Operator's Responsibilities

    Blower is capable of picking up solid objects and the raised position. The driveline can break and throw flying discharging them at high speeds. projectiles that can cause bodily injury or death. 7/31/24 Models SBP1164 and SBP1174 Snow Blower 370-839M...

  • Page 34: Section 4: Operating

    Always comply with all federal, state, and local NOTE: Always check with local regulations to know laws. where snow can be legally piled. Never pile snow on someone else’s property, streets, or sidewalks. Models SBP1164 and SBP1174 Snow Blower 370-839M 7/31/24...

  • Page 35: Inspection Procedures

    Make sure the park stand is in the raised position. 8. Make sure the Snow Blower is clear of snow and other material before engaging the driveline. 9. Make sure the auger and fan operate freely. 7/31/24 Models SBP1164 and SBP1174 Snow Blower 370-839M...

  • Page 36: Operating Controls

    5. The chute deflector can be adjusted to achieve desired snow projection angle and distance. Refer to “Adjust Chute Discharge Angle” on page 26. Models SBP1164 and SBP1174 Snow Blower 370-839M 7/31/24...
  • Page 37 (#9). 8. Reattach lower end of arm (#4) to bolt (#2) with flat washer (#3) and knob (#5) as shown. Hand tighten knob. Unclog Chute With Adjust Arm Figure 4-2 7/31/24 Models SBP1164 and SBP1174 Snow Blower 370-839M...
  • Page 38 With a little practice you will be pleased with what you and and to develop a safe plan before moving snow. your Land Pride Snow Blower can do. Whether you are done blowing snow, need a break, or just need to make a...

  • Page 39: Section 5: Options & Accessories

    The Manual Chute Rotation Kit is offered as an option for SBP1164 and SBP1174 model Snow Blowers. The hand Sold as an accessory, this kit is available for SBP1164 crank connected to a worm drive provides an economical and SBP1174 model Snow Blowers. It includes two Tivar...

  • Page 40: Section 6: Maintenance & Lubrication

    All maintenance in this section should be completed as follows regardless of the suggested intervals above. • At least once a year if Snow Blower is used less than 20 hours annually. • After each storage period. • After each wash. Models SBP1164 and SBP1174 Snow Blower 370-839M 7/31/24...
  • Page 41 5. Close gearbox input shaft guard (#1). 5. Close auger drive shaft guard (#9). 7/31/24 Models SBP1164 and SBP1174 Snow Blower 370-839M...

  • Page 42: Impeller Inspection

    Replace impeller before it causes structural damage to Snow Blower housing. 5. After inspection has been completed, close access door (#4) and secure door in place with hand knobs (#1). Hand tighten knobs. Models SBP1164 and SBP1174 Snow Blower 370-839M 7/31/24...

  • Page 43: Drive Chain Maintenance

    (#7) to force the clip onto the second pin. Refer to Figure 6-5: Adjust take-up sprocket (#2) to tension chain (#4). Refer to “Adjust Drive chain Tension” on page 27. 7/31/24 Models SBP1164 and SBP1174 Snow Blower 370-839M...

  • Page 44: Skid Shoe Maintenance

    2 671725 Cutting edge steel, SBP1164 ... 1 3 804-015C 1/2" spring lock washer....2 2 671732 Cutting edge steel, SBP1174.

  • Page 45: Gearbox Maintenance

    6. Verify O-ring (#2) is on oil level plug (#1) and in good condition, then reinstall and tighten oil level plug. Clean up any oil spills. Dispose of waste oil and oil rags according to your local regulations. 7/31/24 Models SBP1164 and SBP1174 Snow Blower 370-839M...

  • Page 46: Long Term Storage

    Schedule” and “Regular Maintenance” on page 36. 3. Repaint parts where paint is worn or scratched to prevent rust. Ask your dealer for Land Pride aerosol touch-up paint. They are also available in touch-up bottles with brush, quarts, and gallon sizes by adding TU, QT, or GL to the end of the aerosol part number.

  • Page 47: Lubrication Points

    Type of Lubrication: Shell Gadus S5 V100 or equivalent Quantity = As needed 81796 Hours Drive Shaft Spline Hub 1 - Zerk Type of Lubrication: Shell Gadus S5 V100 or equivalent Quantity = As needed 7/31/24 Models SBP1164 and SBP1174 Snow Blower 370-839M...
  • Page 48 Type of Lubrication: AGMA 5EP extreme pressure oil, SAE 80-90W Gear Lube, or equivalent Quantity = Fill until oil begins to flow out of oil level plug hole in gearbox. Models SBP1164 and SBP1174 Snow Blower 370-839M 7/31/24...
  • Page 49 Quantity = Coat generously Disconnect driveline shaft from the tractor and slide apart. Clean and coat the inner tube of the driveline shaft with a light film of grease and then reassemble. 7/31/24 Models SBP1164 and SBP1174 Snow Blower 370-839M...

  • Page 50: Section 7: Specifications & Capacities

    Hydraulic chute rotation Hydraulic motor with sprocket drive Accessory Equipment & Weight Tivar skid shoes & cutting edge 1" (2.5 cm) thick skid shoes, 1" x 3 1/2" (2.5 x 8.9 cm) cutting edge Models SBP1164 and SBP1174 Snow Blower 370-839M 7/31/24...
  • Page 51 Section 7: Specifications & Capacities 81801 64 1/2" (164 cm) 14 3/4" (38 cm) 17 1/2" (45 cm) 14" (36 cm) 40 1/4" (102 cm) 28" (71 cm) 66 1/4" (168 cm) 7/31/24 Models SBP1164 and SBP1174 Snow Blower 370-839M...

  • Page 52: Section 8: Features & Benefits

    The operator can change direction snow is blown while siting on the tractor seat. chute rotation Accessory gouging and nicking surfaces such as sidewalks, Tivar cutting edge and skid shoe Tivar protects against driveways, and paved roads. Models SBP1164 and SBP1174 Snow Blower 370-839M 7/31/24...
  • Page 53 Table of Contents Section 8: Features & Benefits This page left blank intentionally. 7/31/24 Models SBP1164 and SBP1174 Snow Blower 370-839M...

  • Page 54: Section 9: Troubleshooting

    Level Snow Blower. fast Auger flighting is bent or broken. Repair or replace damaged auger. Snow Blower makes intermittent clicking noise Impeller blades are bent or broken. Repair or replace damaged impeller blades. Models SBP1164 and SBP1174 Snow Blower 370-839M 7/31/24...
  • Page 55 Repair or replace damaged auger. Impeller blades are bent or broken. Repair or replace damaged blades. Snow is left on the ground Skid shoes are off the ground. Lower Snow Blower onto skid shoes. 7/31/24 Models SBP1164 and SBP1174 Snow Blower 370-839M...

  • Page 56: Section 10: Torque Values Chart

    Driveline Shear Bolt (M8 x 1.25 mm x 50 mm GR8.8) 19 ft-lbs (25.8 Nm) (See page 37) Drive Shaft Output Shear Bolt (1/4"-20 x 1 1/4", Gr2) 5.6 ft-lbs (7.6 Nm) (33.9 Nm) (See page 37) Models SBP1164 and SBP1174 Snow Blower 370-839M 7/31/24...

  • Page 57: Warranty

    This Warranty is limited to the repair or replacement of any defective part by Land Pride and the installation by the dealer of any such replacement part, and does not cover common wear items such as blades, belts, tines, etc. Land Pride reserves the right to inspect any equipment or parts which are claimed to have been defective in material or workmanship.
  • Page 58 Corporate Office: P.O. Box 5060 Salina, Kansas 67402-5060 USA www.landpride.com...

This manual is also suitable for:

Sbp1174

Table of Contents