ARIETE PRO EVOLUTION Manual page 23

EN
CLEANING MODE
the robot cleaning is automatic.
By pressing the "CLEAN" button on the appli-
ance body, start the "cleaning" mode. Pro
Evolution will clean the room autonomously by
alternately applying:
- spiral movements
- linear, perimeter movements
- linear, diagonal movements
by automatically adapting its path according to
obstacles on the floor:
ATTENTION: for a more effective cleaning and to ensure Pro Evolution covers the whole
surface of the room without leaving any zones in the shortest time, it is necessary to remove
obstacles from the floor as much as possible.
ATTENTION: to prevent Pro Evolution from being snagged, remove or lift electric cables
and wires that may wrap around the rotating brushes causing the risk of furniture fall or Pro
Evolution breakage.
ATTENTION: in case the appliance is used in room subject to high solar exposure, it is recom-
mended to close the shutters thus partially reducing the exposure to prevent infiltrations that
may improperly modify the direction and path of the appliance.
PRO EVOLuTION bEHAVIOuR duRING CLEANING CYCLE
the time required to cover a room may change according to the type of floor, the obstacle amount that
Pro Evolution may find on its path and the possible differences in floor level.
thanks to its front anti-collision sensors, Pro Evolution detects surfaces (walls, furniture, etc.) by
avoiding to collide with them. In presence of corners or furniture tubular parts, a light impact may be
possible.
owing to the special fall-protection sensors on the base, Pro Evolution detects differences in floor level
or empty spaces thus avoiding falls from stairs or ledges.
Pro Evolution can pass different levels, as thresholds and carpets, and wiggle out of obstacles (tubes,
stands, etc.) lower than 1 cm.
ATTENTION: in case of carpet cleaning, prevent Pro Evolution from coming in contact with
fringes and avoid cleaning of shaggy carpets, as they ma wrap around the rotating brushes.
- 21 -