iBell IBL RV19-26 Operator's Manual page 25

MAIN BRUSH & SIDE BRUSH:
After being used for a period of time, the brushes need to be
cleaned or replaced to work more effectively. A Multi-Function
cleaning tool is highly recommended for easy cleaning these
components.
 Turn the robot over. Remove the main brush cover. Remove the
main brush. Cut off and remove any tangled hair or debris from
the brush.
 Remove the Side brushes. Remove any hair or debris tangled
around the side brushes and wipe their slots with a clean cloth.
If the side brushes bent, please soak it with hot water (about 80°C)
until it recovers, take out the brushes after recovery.
OTHER COMPONENTS:
The charging station, charging pole, the sensors etc., all contain
sensitive electronic components, please use dry dishcloth or soft
cotton cloth when cleaning, and do not use wet cloth to prevent
damage caused by water inflow. Do not spray cleaning solution
directly into the sensor opening.
To keep Robot running at peak performance, do maintenance
and replacement according to the following frequency:
Robot Part
Mopping Cloth
Dust Bin
Side brush
Main Brush
Sponge Filter
Wheel, Anti-drop
sensor, Bumper,
Charging contacts
Charging Station
pins.
Maintenance
Frequency
After each use
After each use
Once every 2 weeks
Once per week
Once every 2 weeks
Once per week
24
Replacement
Frequency
Every 50 washings
___
Every 3-6 months
Every 6-12 months
Every 4-6 months
___
IBL RV19-26