iBell IBL RV19-26 Operator's Manual page 21

WET MOPPING
To initiate the Wet mopping function:
 Open the top cover and take out the dustbin (dust box+water
tank/reservoir) from the appliance.
 Pull up the seal cover to fill water up to the required level. There
is an outlet on the bottom of the appliance to initiate water.
 Place the dustbin back into the cleaner.
 Attach the mopping frame to bottom of the robot, stick the
mopping cloth on mopping frame.
 Take off the mopping cloth when cleaning on carpet or rugs.
Do remember to empty water when you are not mopping floor.
No grain is allowed in water tank.
2 in 1 Dust box + water tank
is inside the top cover.
*Only in certain designs, the bottom case can be slide out, where the dust box
and water tank are visible, in that way it would be easy for filling the water and
attaching the mopping cloth within the same.
Fill the seal cover with
water (150 ml total
capacity)
20
Attach mopping
cloth to the frame,
then to the device.
IBL RV19-26