iBell IBL RV19-26 Operator's Manual page 18

MAIN BRUSH OPTION:
The best choice for deep cleaning is with a combination of the Main
Brush and strong suction. The Main brush option usually comes pre-
installed with the product.
 For installing the main brush, Turn
the robot over.
 Push the Direct suction option and
remove it. Insert the Main brush into
the bottom of the robot.
 Line up the Main brush cover tabs
with the slots on the bottom of the
robot. Press until the component
clicks into place.
WARNING!
operation! Do not use a product that is only partly assembled or
assembled with damaged parts! Follow the assembly instructions
and use the picture provided in the above overview as a visual guide
to easily understand the various parts and assemble the product!
POWER ON/OFF
Turn the robot's Power Switch (6) to the ON/OFF position to power
ON/OFF. This is powered ON when it emits a musical sound and the
AUTO Mode Button stays illuminated (usually).
The product must be fully assembled before
17
IBL RV19-26