Installation - Zanussi ZWD76NB4PW User Manual

Electrical connection
Level of protection against ingress of solid particles and
moisture ensured by the protective cover, except where
the low voltage equipment has no protection against
moisture
1)
Water supply
Water supply pressure
2)
Maximum wash load
Maximum dry load
Spin Speed
1) Connect the water inlet hose to a water tap with a 3/4'' thread.
2) The appliance works correctly if the water pressure is not lower than 0.05 MPa (0.5 bar). If you cannot
connect the water inlet hose to the cold water tap of the primary hydraulic system, connect it to your do-
mestic cold water storage system. Make sure not to exceed a distance of 5.02 m (16.5 ft) between the
appliance inlet hose and the bottom of the water storage tank.

INSTALLATION

WARNING! Refer to Safety chapters.
UNPACKING
WARNING! Remove all the packaging
and the transit bolts before installing
the appliance.
1. Use the gloves. Remove the external film. If
necessary, use a cutter.
Voltage
Overall power
Fuse
Frequency
Minimum
Maximum
Cotton
Cotton
Synthetics
Maximum spin speed
230-240 V
2200 W
13 A
50 Hz
IPX4
Cold water
0.5 bar (0.05 MPa)
8 bar (0.8 MPa)
7 kg
4 kg
3 kg
1551 rpm
2. Remove the cardboard top. Remove the
polystyrene packaging materials.
3. Remove the internal film.
4. Open the door. Remove the polystyrene piece
from the door seal and all the items from the
7