Other Functions; Card Remote Control - Aiwa CDC-X437 Operating Instructions Manual

OTHER FUNCTIONS

SEL
PS
Jog dial (PUSH-SOURCE)
Changing the key illumination color
You can choose blue or red as the key illumination color.
1
Press and hold Jog dial (PUSH-SOURCE) until
"ILL" appears on the display.
2
Turn Jog dial to select "1 (for blue)" or "2 (for red)."
Setting the dimmer of the display
1
Press and hold SEL until "D" appears in the display.
2
Turn Jog dial to select "0 (bright)" or "1 (dimmed)."
Displaying the VU level indicator
1
Turn off the unit.
2
Press and hold PS until "VU" appears in the display.
3
Turn Jog dial to selection (level indicators appear)
or off (level indicators disappear).
4
Press PS.

CARD REMOTE CONTROL

Names of parts
1 TUNER button
2 CD button
3 AMS (Auto music sensor) r button
4 AMS (Auto music sensor) t button
5 PS (preset) button
6 TUNING UP/DOWN buttons
7 VOLUME +/- buttons
Preparations
A lithium battery is installed in the remote control at the
factory.
Before you use the remote control, be sure to remove
the insulating sheet by simply pulling it out.
Remote control (back)
Replacing the battery
1 Insert the tip of a pointed object A into the hole B
and pull out the battery holder to remove the lithium
battery (CR2025).
Remote control (back)
Battery holder
2
Install a new lithium battery (CR2025) with the )
side facing up in the battery holder.
3
Push the battery holder into the unit until it clicks.
Note
When the infrared receptor on the main unit is exposed
to direct sunlight, it may not respond to signals from the
remote control.
Insulating sheet
6 6
ENGLISH ENGLISH