Table of Contents
Advertisement
anapat SOFTW ARE
INSTALLATION
Before beginning the installation of the software, please remember to uninstall any previously
installed versions of the software, to avoid potential conflicts, by using the Windows "Add or
Remove Programs" function.
Next, please obtain the "Anapat" software directly from A-NeuVideo website (listed under the
product) and save it in a directory where you can easily find it. Extract all files from the
zip
file, find the Setup.exe file and execute it to launch the Installation Wizard.
Follow the installation prompts and select your preferred installation location to complete the
installation.
After the installation has completed, a copy of the Anapat shortcut will be placed within your
Start menu and it will have the same icon as seen here.
CONNECTION
The Anapat software can connect to the ANI-4KANA via RS-232 or Ethernet. The ANI-4KANAL via
RS-232 (Using the Micro-USB port). Please follow the steps below to connect using the method
appropriate for the device you wish to control.
CONNECT VIA ETHERNET
Step 1: Start the Anapat software by clicking on it in the Start Menu.
Step 2: Select "Ethernet" as the control interface.
Step 3: (If you already know the IP address of the unit, skip to Step 4.) If you do not know the IP
address of the unit you wish to connect to, click on the "Find IP" button. This will open up a window
listing all available units on the local network.
(ANI-4KANA Only)
80
Anapat_2.23.
Advertisement
Table of Contents
