Telnet Control - A-Neuvideo ANI-4KANA Instruction Manual

Telnet Control

Before attempting to use Telnet control, please ensure that both the unit and the PC are connected
to the same active networks.
Start your preferred Telnet/Console client, or use the built in client provided by most modern computer
operating systems. After starting the client, connect by using the current IP address of the unit and
port 23 (if the communication port number used by the unit has not been changed previously). This
will connect us to the unit we wish to control and commands may now be entered directly.
NOTE 1: If the IP address of the unit is changed then the IP address required for Telnet access will
also change accordingly.
NOTE 2: The default IP address is 192.168.1.50 and the default communication port is 23.
To Access Telnet
Windows 7
Windows 10
In Mac OS X
Once in the Command Line Interface (CLI), type "telnet" followed by the current IP address of the
unit and "23", then hit ENTER. See below for reference.
This will connect us to the unit we wish to control. Type
Click START, type "cmd" in the search field and press ENTER.
1. Open "Control Panel".
2. Open "Programs and Features".
3. Select the "Turn Windows features on or off " option.
4. Check the "Telnet Client" box.
5. Click "OK". A box will appear that says "Windows Features" and
"Searching for required files". When complete, the Telnet client should be
installed in Windows.
Click Go > Applications > Utilities > Terminal.
to list the available commands.
"help"
11