Controls
Time
The time is displayed in the in‐
strument cluster.
When the digital tachometer is
activated, the time can be dis‐
played in the onboard computer.
The time can be set on the Control Display.
Date
The date is displayed in the on‐
board computer.
The date and date format can be
set on the Control Display.
Digital tachometer
Display
The current speed is displayed
in the instrument cluster.
Activate display
1.
"Settings"
2.
"Instrument cluster"
3.
"Digital speedometer"
Adjusting the unit
1.
"Settings"
2.
"Language/Units"
3.
"Dig. speedo:"
4.
Select the desired unit.
Settings are stored for the profile currently
used.
86
Displays
Online Edition for Part no. 01 40 2 974 597 - VI/16
Gear display with Drivelogic
Sequential mode
▷
Engaged gear, arrow 1.
▷
Selected driving program,
Drivelogic, arrow 2.
Drive mode
▷
Engaged gear together with
a D, arrow 1.
▷
Selected driving program,
Drivelogic, arrow 2.
Range
Display
With a low remaining range:
▷
A Check Control message is
displayed briefly.
▷
The remaining range is
shown on the onboard com‐
puter.
▷
With a dynamic driving style, e.g., taking
curves aggressively, the engine function is
not always ensured.
The Check Control message appears continu‐
ously below a range of approx. 30 miles/50 km.
NOTE
With a range of less than 30 miles/50 km
it is possible that the engine will no longer have
sufficient fuel. Engine functions are not en‐
sured anymore. There is a risk of property
damage. Refuel promptly.◀