Telo Base Station Quick Reference; Status Lights - ooma Telo 4G Quick Start Manual

Telo Base Station Quick Reference

POWER INTERNET
USB HOME PHONE
System Status
Delete Play
Rewind
12
Play Key Press to hear your voicemail
messages. Press again to stop
playback. Key will blink when there
are new messages.
Fast Forward Key During voicemail
playback, press to skip to the next
Page Key
message. Press and hold to toggle
Do Not Disturb.
Rewind Key During voicemail
playback, press once to replay the
current message and twice to skip
to the previous message.
Press to adjust brightness of the
status light.
Delete Key During voicemail playback,
Volume
press to delete the current message.
Volume Adjustment Key Press to
adjust the volume level.
Page Key (on rear of Base
Station) Press to locate your Ooma
handsets. Press-and-hold for three
seconds to register a new cordless
Ooma device such as an HD3
Handset or Linx.
Fast Forward

Status Lights

Base Station
Solid Blue System Status Indicates that all
Ooma services are operational. You will hear the
Ooma dial tone when you pick up the phone.
Solid Purple System Status Indicates that
your Ooma service is working and Do Not
Disturb is enabled. All incoming calls will be
directed to voicemail.
Blinking Purple System Status Indicates that
your Base Station is not connected to an Ooma
account, or that it must update its software.
Blinking Red System Status Indicates that your
Ooma service is not working. All services are
unavailable. You will not hear any dial tone and
will not be able to make or receive calls.
White System Status Indicates that your
Ooma Base Station is not powered on or that
brightness is turned all the way down.
4G LTE Adapter
Blinking Blue, Green, and Red Adapter is
completing its first boot cycle.
Solid Yellow Adapter is booting up after its first
boot cycle.
Blinking Green Adapter is powered on but
searching for signal.
Solid Blue Adapter is connected with excellent
signal strength.
Solid Green Adapter is connected with good
signal strength.
Blinking Red Adapter is missing its SIM or the SIM
is inserted incorrectly.
13