Page 2
w w w.jbctools.com Changing the brush 1. Push the black 3. Place the new Black tab tab to lift out the brush into the cleaner-extractor desired position. Use the slots set. to adjust E.g. Positioning the brush position the brush further back keeps the solder waste from splashing...
Page 3
Warranty JBC’s 2 year warranty covers this device against all manufacturing defects, including the replacement of defective parts and labour. Warranty does not cover product wear due to use or mis-use. In order for the warranty to be valid, equipment must be returned, postage paid, to the dealer where it was purchased.