Advertisement
Step 2
Step 2
Step 3.
Remove the burner cover screw. Save
for reinstallation.
Step 3
Step 3
Step 4.
Fold back the tab of the cover. This
will allow the burner cover to shift left
during removal.
Step 4
Step 4
Step 5.
Slide burner cover to the left and re-
move. It may be necessary to pry the
cover out using a slotted screw driv-
er.
Step 5
Step 5
Disconnect the LP
gas connection
3311145.000 Secondary Burner Housing Kit Service Instructions
Step 6.
If required for access to install all com-
ponents of Secondary Burner Housing
Kit, remove the burner by removing
the fi ve (5) fastening screws. Save
for reinstallation.
Step 6
Step 6
Step 6
Step 6
Step 7.
Slide bottom plate, Item (2), into posi-
tion. Edge with the two (2) mounting
tabs will go toward you. Tabs should
be up. See Step 1 photo. One end of
the bottom plate should rest on the
top of the refrigerator leg.
The bottom plate has two score lines
on it. Although most units will not re-
quire modifi cation, you may need to
shear the bottom plate off at these
locations to get it to fi t on units that
already have a sheet metal barrier
under the burner. (See important
message on page 4 of these instruc-
tions.
Step 7
Step 7
Step 7
Step 7
5
Advertisement
