Advertisement
Step 31. Bend the two tabs on the holder to se-
cure the thermal fuse.
Step 31
Step 31
Step 32. Secure the holder to the new boiler
cover with two (2) #8 x 3/8" screws,
Item (11).
Step 32
Step 32
Step 32
Step 32
Step 32
Step 32
The thermal fuse
and holder in place
3311145.000 Secondary Burner Housing Kit Service Instructions
NOTE:
For integrated ignition equipped
models, proceed to step 36.
Step 33. Using a pair of pliers, connect one end
of the supplied wire Item (12) to the J4
or T4 terminal on non universal power
modules and J1 on universal power
modules.
Step 33
Step 33
Step 34. Connect the provided wire, Item (12),
to the other terminal on the thermo
disc.
Step 34
Step 34
Step 35. If the power module cover was re-
moved, snap it back in place. Replace
the screw.
Step 35
Step 35
13
Advertisement
